Pvc Electrical Tape Coating Machine

Pvc Electrical Tape Coating Machine

High Speed Laminating Hot Melt Coating Machine mainly used in pressure sensitive adhesive coating, such as self-adhesive label, heat sensitive label, adhesive tapes, advertisement inkjet material, etc.

Pvc Electrical Tape Coating Machine

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Auxiliary accessories for the tape machine:
   Pipe cutting machine, power distribution cabinet. According to the production needs, Zhongsu can choose the auxiliary auxiliary body: multi-color printing machine, slitting machine, rewinding machine, beater, pipe drawing machine, etc. In order to produce better products, it is recommended to have a pipe cutter. Automatic pipe cutting machine
Tape machine installation and adjustment:
   1. Install the front frame, the middle frame and the rear frame on the reserved plane at the predetermined position, and horizontally align with the foundation firmly, so that the center line of the frame is in a straight line in the longitudinal direction; The rack is offset and swaying occurs to avoid accidents.
   2. Install the configured ovens in sequence on each rack and secure them with bolts; keep the oven and rack level and stable.
   3. Install the power distribution cabinet next to the front rack or at a convenient place. Connect the circuits according to the instructions. Finally, connect the power supply (make sure to disconnect the power when wiring).
   4. Install each internal configuration piece according to the set position, and adjust the level of each median, unwinding, winding, etc., and the axes are parallel to each other, perpendicular to the direction of tape movement. During the installation process, the smooth surface of each media cannot be scratched, and the correct installation of each component is maintained.
   5. Install the gears, pulleys and sprocket according to the test, and try to rotate properly to ensure the flexibility of rotation without abnormality and blockage; and add the corresponding lubricating oil to the chain and reducer.
 

Pvc Electrical Tape Coating Machine

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Auxiliary accessories for the tape machine:

    6. Check whether there are any omissions in the installation, ensure the installation of the heater, the heat sensor, and the drive train; check whether the circuits are connected correctly, and the wires are not leaking; whether the whole body is offset incorrectly, and the oven has a gap.
    7. After the installation is correct, start the test machine one by one. If there is any abnormality, stop the machine immediately and check the adjustment; after confirming the completion, start the production again (pay attention to personal safety and machine safety during the operation). The tape machine constitutes an important part of its function:
Unwinding device - responsible for the discharge and winding of the parent roll, can be equipped with tension control.
Printed section - configurable for monochrome, two-color printing.
The sizing part consists of a topping roll and a squeegee roll for applying glue to the substrate. Oven part - dry the glue.
Slitting section - the substrate after the coating is cut as needed.
Winding part - Winding the tape after slitting, you can determine the length of the winding as needed, or you can collect large rolls.
    Transmission section - sub-chain drive and gearbox drive. The average speed of the chain drive is equal, but there is an instantaneous speed, which is not suitable for services with high precision. Slitting machine - slitting the tape machine
Pipe puller - unloading and loading the paper tube on the take-up reel by hydraulic pressure
Automatic pipe cutting machine - slitting the paper tube
Rewinding machine - finishing some of the tape defective products (especially the untidy winding) to reduce the defective rate.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com