Mini Tape Machinery

Mini Tape Machinery

Function:  packaging tape machine producing clear & color & printed packing tapes.

Mini Tape Machinery

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Tape dispenser installation www.easttapemachine.com
1. The site for site selection and installation of the tape conveyor must be on a relatively flat hardened floor. Because the tape machine needs a good environment for operation, it cannot be said that the ground is pitted and the various parts of the operation are uncoordinated to produce the product. Not qualified! This is all that needs to be considered.
2, the machine is assembled, the tape machine is generally separated from each other. Before the installation is completed, after the site is selected, the front and rear intermediate frames are placed on the level ground to maintain a uniform horizontal line! To maintain stable operation.
3. After the installation is completed, pre-work processing is performed on each part of the machine, including chain, sprocket, bearing, reducer, lubricating oil or grease.
4. After the lubrication treatment, the main components are debugged to keep them rotating smoothly, and no blockage can occur.
5. After the installation of each part is completed, turn on the power to test the machine! No need to install materials during the test machine, and do a bare test! Observe the operation of each component! Found an abnormality, power-off treatment,
6. When the tape machine is not running, the power must be disconnected for safety.

Mini Tape Machinery

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Tape machine technical parameters www.easttapemachine.com
Machine type: oven-heated, shaped arch,
Substrate width: min500mm -- max1000mm.
Coating width: 500mm -- 1000mm
Substrate diameter: unloading up to 600mm.
Coating coating: water-based pressure sensitive adhesive
Substrate raw material: BOPP film
Gluing method: wire rod type gluing
Glue viscosity: 50-150cps.
Mechanical speed: 200 M/min.
Coating speed: up to 15~20M/min (according to customer requirements)
Reference temperature: Indoor: Calculated by Min.10degree C.
Oven temperature: up to 120 ° C.
Heating method: steam, heat transfer oil (according to customer choice)
Unwinding method: single station unwinding
Winding method: Double station exchange winding (4 axis winding)
Compressed air: 5Kg/Cm2.
Total power : 15KW, 380V, 50Hz

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com