Bopp Adhesive Packing Tape Machine
Spiral paper core making machine / Paper tube bobbin coiling machine for adhesive tapes.
Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine
Tape machine parameters settings:
Production speed: The coating production speed has a direct relationship with the thickness of the coating, the length of the oven, and the drying temperature. Increasing the speed can increase the drying temperature in the oven; in the case of product quality assurance, the speed can be appropriately increased.
Tool setting: The blade pitch on the tool shaft can be adjusted according to the production process requirements, and the tool distance of the multi-knife pipe cutting machine can be adjusted so that the cut product and the blade spacing should correspond.
Tape factory budget cost --
Printing patterns and text on the sealing tape not only increases the value of the tape, but also gives the tape a certain advertising function. When printing, it is necessary to pay attention to selecting the appropriate ink. Improper ink will affect the coating effect of the pressure sensitive adhesive. Something will lead to the adhesion of the pressure sensitive adhesive at the pattern, and the rubber transfer phenomenon occurs during unwinding.
2. Coating and drying
Coating is the most important process for making sealing tape. The pressure sensitive adhesive is applied to the BOPP film and then dried by an oven.
3. Slitting and winding
Cut the parent roll into the size that the user needs, and then curl it. This process should pay attention to keep the sharpness of the slitting knife, otherwise the edge of the tape will be uneven, which will cause the tape to be easily torn when it is wound.
According to the size of the tape machine, it is 9.6 meters long, 2.2 meters wide and 2.2 meters high. The required workshop area is 25 × 10 = 250 square meters. The office area needs 10×10=100 square meters, and the total plant area is 250+100=350 square meters.