Packing Tape Making Machine India
Specialized in coating PET film.
Suitable for coating of BOPP adhesive tape.
Sealing tape characteristics --
Compression fixation: The product is wrapped and wrapped by the retractive force of the stretched film to form a compact, space-saving unit, so that the trays of the product are tightly wrapped together, which can effectively prevent the products during transportation. The mutual misalignment and movement, while the adjustable tensile force can make the hard product close to each other, making the soft product tight, especially in the tobacco industry and the textile industry.
Cost-saving: The product packaging can be effectively reduced by using the wrapping film. The winding film is only about 15% of the original box packaging, about 35% of the heat shrinkable film, and about 50% of the carton packaging. At the same time, it can reduce the labor intensity of workers, improve packaging efficiency and packaging grade.
Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine
Tape dispenser installation www.easttapemachine.com
1. The site for site selection and installation of the tape conveyor must be on a relatively flat hardened floor. Because the tape machine needs a good environment for operation, it cannot be said that the ground is pitted and the various parts of the operation are uncoordinated to produce the product. Not qualified! This is all that needs to be considered.
2, the machine is assembled, the tape machine is generally separated from each other. Before the installation is completed, after the site is selected, the front and rear intermediate frames are placed on the level ground to maintain a uniform horizontal line! To maintain stable operation.
3. After the installation is completed, pre-work processing is performed on each part of the machine, including chain, sprocket, bearing, reducer, lubricating oil or grease.
4. After the lubrication treatment, the main components are debugged to keep them rotating smoothly, and no blockage can occur.
5. After the installation of each part is completed, turn on the power to test the machine! No need to install materials during the test machine, and do a bare test! Observe the operation of each component! Found an abnormality, power-off treatment,
6. When the tape machine is not running, the power must be disconnected for safety.