Tape Machine Operator

Tape Machine Operator

Specialized in coating PET film. 
Suitable for coating of BOPP adhesive tape.

 

Tape Machine Operator

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Auxiliary accessories for the tape machine:

    6. Check whether there are any omissions in the installation, ensure the installation of the heater, the heat sensor, and the drive train; check whether the circuits are connected correctly, and the wires are not leaking; whether the whole body is offset incorrectly, and the oven has a gap.
    7. After the installation is correct, start the test machine one by one. If there is any abnormality, stop the machine immediately and check the adjustment; after confirming the completion, start the production again (pay attention to personal safety and machine safety during the operation). The tape machine constitutes an important part of its function:
Unwinding device - responsible for the discharge and winding of the parent roll, can be equipped with tension control.
Printed section - configurable for monochrome, two-color printing.
The sizing part consists of a topping roll and a squeegee roll for applying glue to the substrate. Oven part - dry the glue.
Slitting section - the substrate after the coating is cut as needed.
Winding part - Winding the tape after slitting, you can determine the length of the winding as needed, or you can collect large rolls.
    Transmission section - sub-chain drive and gearbox drive. The average speed of the chain drive is equal, but there is an instantaneous speed, which is not suitable for services with high precision. Slitting machine - slitting the tape machine
Pipe puller - unloading and loading the paper tube on the take-up reel by hydraulic pressure
Automatic pipe cutting machine - slitting the paper tube
Rewinding machine - finishing some of the tape defective products (especially the untidy winding) to reduce the defective rate.

Tape Machine Operator

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

 

Tape machine parameters settings:

Production speed: The coating production speed has a direct relationship with the thickness of the coating, the length of the oven, and the drying temperature. Increasing the speed can increase the drying temperature in the oven; in the case of product quality assurance, the speed can be appropriately increased.

Tool setting: The blade pitch on the tool shaft can be adjusted according to the production process requirements, and the tool distance of the multi-knife pipe cutting machine can be adjusted so that the cut product and the blade spacing should correspond.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com