Water Gum Tape Machine

Water Gum Tape Machine

Machines in this series are suitable for reel-shape materials such as BOPP, PET, CPP, luminum  foil, and  paper, 2-layer  repetitious  laminating, high strength production, producing high-quality compound materials  with  high freshness preserving, and boiling & steaming resistance.

Water Gum Tape Machine

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Auxiliary accessories for the tape machine:
   Pipe cutting machine, power distribution cabinet. According to the production needs, Zhongsu can choose the auxiliary auxiliary body: multi-color printing machine, slitting machine, rewinding machine, beater, pipe drawing machine, etc. In order to produce better products, it is recommended to have a pipe cutter. Automatic pipe cutting machine
Tape machine installation and adjustment:
   1. Install the front frame, the middle frame and the rear frame on the reserved plane at the predetermined position, and horizontally align with the foundation firmly, so that the center line of the frame is in a straight line in the longitudinal direction; The rack is offset and swaying occurs to avoid accidents.
   2. Install the configured ovens in sequence on each rack and secure them with bolts; keep the oven and rack level and stable.
   3. Install the power distribution cabinet next to the front rack or at a convenient place. Connect the circuits according to the instructions. Finally, connect the power supply (make sure to disconnect the power when wiring).
   4. Install each internal configuration piece according to the set position, and adjust the level of each median, unwinding, winding, etc., and the axes are parallel to each other, perpendicular to the direction of tape movement. During the installation process, the smooth surface of each media cannot be scratched, and the correct installation of each component is maintained.
   5. Install the gears, pulleys and sprocket according to the test, and try to rotate properly to ensure the flexibility of rotation without abnormality and blockage; and add the corresponding lubricating oil to the chain and reducer.
 

Water Gum Tape Machine

Tape factory budget cost --

Production process

crafting process 
Printing
Printing patterns and text on the sealing tape not only increases the value of the tape, but also gives the tape a certain advertising function. When printing, it is necessary to pay attention to selecting the appropriate ink. Improper ink will affect the coating effect of the pressure sensitive adhesive. Something will lead to the adhesion of the pressure sensitive adhesive at the pattern, and the rubber transfer phenomenon occurs during unwinding.
2. Coating and drying
Coating is the most important process for making sealing tape. The pressure sensitive adhesive is applied to the BOPP film and then dried by an oven.
3. Slitting and winding
Cut the parent roll into the size that the user needs, and then curl it. This process should pay attention to keep the sharpness of the slitting knife, otherwise the edge of the tape will be uneven, which will cause the tape to be easily torn when it is wound.

Plant area
According to the size of the tape machine, it is 9.6 meters long, 2.2 meters wide and 2.2 meters high. The required workshop area is 25 × 10 = 250 square meters. The office area needs 10×10=100 square meters, and the total plant area is 250+100=350 square meters.

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com