Equipment For Adhesive Tape Making

Equipment For Adhesive Tape Making

Packaging bopp packing clear brown adhesive tape jumbo roll production line making coating machine.

Equipment For Adhesive Tape Making

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Tape machine technical parameters
Machine type: oven-heated, shaped arch,
Substrate width: min500mm -- max1000mm.
Coating width: 500mm -- 1000mm
Substrate diameter: unloading up to 600mm.
Coating coating: water-based pressure sensitive adhesive
Substrate raw material: BOPP film
Gluing method: wire rod type gluing
Glue viscosity: 50-150cps.
Mechanical speed: 200 M/min.
Coating speed: up to 15~20M/min (according to customer requirements)
Reference temperature: Indoor: Calculated by Min.10degree C.
Oven temperature: up to 120 ° C.
Heating method: steam, heat transfer oil (according to customer choice)
Unwinding method: single station unwinding
Winding method: Double station exchange winding (4 axis winding)
Compressed air: 5Kg/Cm2.
Total power : 15KW, 380V, 50Hz

Equipment For Adhesive Tape Making

Tape factory budget cost --

Production process

crafting process 
Printing patterns and text on the sealing tape not only increases the value of the tape, but also gives the tape a certain advertising function. When printing, it is necessary to pay attention to selecting the appropriate ink. Improper ink will affect the coating effect of the pressure sensitive adhesive. Something will lead to the adhesion of the pressure sensitive adhesive at the pattern, and the rubber transfer phenomenon occurs during unwinding.
2. Coating and drying
Coating is the most important process for making sealing tape. The pressure sensitive adhesive is applied to the BOPP film and then dried by an oven.
3. Slitting and winding
Cut the parent roll into the size that the user needs, and then curl it. This process should pay attention to keep the sharpness of the slitting knife, otherwise the edge of the tape will be uneven, which will cause the tape to be easily torn when it is wound.

Plant area
According to the size of the tape machine, it is 9.6 meters long, 2.2 meters wide and 2.2 meters high. The required workshop area is 25 × 10 = 250 square meters. The office area needs 10×10=100 square meters, and the total plant area is 250+100=350 square meters.



Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?