Equipment For Bopp Tape Making

Equipment For Bopp Tape Making

1.1. Used to produce BOPP packing tape;

1.2. Suitable material: 

1.2.1. Base material: BOPP film (0.023-0.032mm) ;

1.2.2. Glue: acrylic acid glue, solid content no less than 55%, viscosity: 150~200CPS.

Equipment For Bopp Tape Making

Tape Making Machien

 

Protection management regulations:

Article 3
The tape machine protection installation must meet the following requirements:

6. All belt conveyors drive the drum section and the tail drum to install an over-temperature and automatic smoke sprinkler, and must be installed near the drum to ensure that the automatic sprinkler can effectively extinguish the fire in the event of fire; the water supply system is guaranteed to be unblocked, and no artificial shutdown is allowed. .
Temperature Sensor Installation Standard A temperature sensor is required at each drive roller. The temperature sensor should be mounted along the middle (axial) of the drive roller, 100 mm from the roller surface.
Smoke sensor installation standard For the belt conveyor using the unloading roller as the driving roller, the smoke sensor should be installed directly above the drum, no more than 1000mm from the surface of the drum; for the ordinary driving belt conveyor, the smoke sensor should be installed on the upper roller The middle position of the frame is 1000mm behind the lower air flow side driving roller.
Offset installation requirements: The action point of the deviation switch is not more than 50MM from the outer edge of the idler on the belt conveyor. The deviation between the deviation and the belt surface is 90 ° ± 5 °; the deviation switch must be fixed with a special shelf and must not be swung;

 

Equipment For Bopp Tape Making

Commonly used BOPP films include: ordinary biaxially oriented polypropylene film, heat-sealed biaxially oriented polypropylene film, cigarette packaging film, biaxially oriented polypropylene pearl film, biaxially oriented polypropylene metallized film, matte film, and the like. The performance parameters and main uses of the various films are as follows:
Ordinary BOPP film
Uses: Mainly used for printing, bag making, adhesive tape and compounding with other substrates.
Performance: * High transparency and gloss * Excellent ink and coating
Water vapor and grease barrier properties with excellent adhesion * Low electrostatic performance Common thickness: 15, 19, 20, 25, 28, 35, 38, 40, 45jim
Thickness tolerance: ±3% (P-ray thickness measurement) Performance
Typical tensile strength of the unit MD MPa >130 TD >220 Elongation at break MD % <180TD<65 Thermal shrinkage MD % <4 TD <2.5
Coefficient of friction Static <0.7 Kinematics <0.7 Haze l2-30fim%^1.5 31-60[im^2.5
Gloss % 35 Wetting tension mN/m >38 Moisture permeability g/(m2*24h 0.1min) <2

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com