Color Tape Manufacturing Machinery

Color Tape Manufacturing Machinery

1.1. Used to produce BOPP packing tape;

1.2. Suitable material: 

1.2.1. Base material: BOPP film (0.023-0.032mm) ;

1.2.2. Glue: acrylic acid glue, solid content no less than 55%, viscosity: 150~200CPS.

Color Tape Manufacturing Machinery

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Tape dispenser installation www.easttapemachine.com
1. The site for site selection and installation of the tape conveyor must be on a relatively flat hardened floor. Because the tape machine needs a good environment for operation, it cannot be said that the ground is pitted and the various parts of the operation are uncoordinated to produce the product. Not qualified! This is all that needs to be considered.
2, the machine is assembled, the tape machine is generally separated from each other. Before the installation is completed, after the site is selected, the front and rear intermediate frames are placed on the level ground to maintain a uniform horizontal line! To maintain stable operation.
3. After the installation is completed, pre-work processing is performed on each part of the machine, including chain, sprocket, bearing, reducer, lubricating oil or grease.
4. After the lubrication treatment, the main components are debugged to keep them rotating smoothly, and no blockage can occur.
5. After the installation of each part is completed, turn on the power to test the machine! No need to install materials during the test machine, and do a bare test! Observe the operation of each component! Found an abnormality, power-off treatment,
6. When the tape machine is not running, the power must be disconnected for safety.

Color Tape Manufacturing Machinery

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

 

Tape machine parameters settings:

Production speed: The coating production speed has a direct relationship with the thickness of the coating, the length of the oven, and the drying temperature. Increasing the speed can increase the drying temperature in the oven; in the case of product quality assurance, the speed can be appropriately increased.

Tool setting: The blade pitch on the tool shaft can be adjusted according to the production process requirements, and the tool distance of the multi-knife pipe cutting machine can be adjusted so that the cut product and the blade spacing should correspond.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com