Skotch Tape Manufacturing Machinery

Skotch Tape Manufacturing Machinery

It is mainly used for proucing kinds of medical tape which are coating zinc oxde hot melt pressure sensitive adheive on silicon paper/glassine paper/ginning membrance, then laminate with cartoon PE/spun-laced non-woven fabric/cotton. or coat adhesive on kinds of substrate directly.

Skotch Tape Manufacturing Machinery

Tape Making Machien


Protection management regulations:

Article 3
The tape machine protection installation must meet the following requirements:

3. At least one set of anti-running switch shall be installed at the head, middle drive and tail of the belt machine; the delay of the belt machine's deviation switch shall not exceed 2S, and the deviation protection test shall be performed once a week, and the record shall be made; A deviation tester (installation height exceeding 1.8 m) at the elevated position of the belt conveyor must be equipped with a drawstring test device. The definition of the deviation of the belt machine: the upper surface of the upper belt is out of the upper roller for the deviation, and the lower belt is the deviation of the belt.

4. At least two sets of anti-ripping protection shall be installed at each receiving point of the tape machine. The tear-proof protection distance shall not exceed 5 meters. The longitudinal tearing of the rope shall be placed in the middle of the vertical tearing of the pirated sheet. Rope plus travel switch form and two logic "AND gate" flap cleaner plus travel switch form;

5. When the tape machine installation length exceeds 100 meters, at least one pull-type emergency stop switch should be set every 100 meters, and one intelligent amplified telephone should be set every 200 meters; all locked and amplified telephones should have a locking function, and Number management along the line and the amplified telephone.

Skotch Tape Manufacturing Machinery

BOPP tape technical specifications

First, the purpose 
1.1 Standardize the supplier's production quality control behavior to ensure the packaging process requirements for packaging tape. 1.2 This Agreement is a quality assurance program that is common to all staff participating in the Program.

Second, the scope of application
This standard specifies the technical requirements, test methods and acceptance rules for pressure-sensitive adhesive tapes (hereinafter referred to as tapes) for packaging and packaging of biaxially oriented polypropylene film (BOPP) extrusion biaxially.


Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?