It is mainly used for proucing kinds of medical tape which are coating zinc oxde hot melt pressure sensitive adheive on silicon paper/glassine paper/ginning membrance, then laminate with cartoon PE/spun-laced non-woven fabric/cotton. or coat adhesive on kinds of substrate directly.
Tape Making Machien
Protection management regulations：
The tape machine protection installation must meet the following requirements:
6. All belt conveyors drive the drum section and the tail drum to install an over-temperature and automatic smoke sprinkler, and must be installed near the drum to ensure that the automatic sprinkler can effectively extinguish the fire in the event of fire; the water supply system is guaranteed to be unblocked, and no artificial shutdown is allowed. .
Temperature Sensor Installation Standard A temperature sensor is required at each drive roller. The temperature sensor should be mounted along the middle (axial) of the drive roller, 100 mm from the roller surface.
Smoke sensor installation standard For the belt conveyor using the unloading roller as the driving roller, the smoke sensor should be installed directly above the drum, no more than 1000mm from the surface of the drum; for the ordinary driving belt conveyor, the smoke sensor should be installed on the upper roller The middle position of the frame is 1000mm behind the lower air flow side driving roller.
Offset installation requirements: The action point of the deviation switch is not more than 50MM from the outer edge of the idler on the belt conveyor. The deviation between the deviation and the belt surface is 90 ° ± 5 °; the deviation switch must be fixed with a special shelf and must not be swung;
BOPP tape technical specifications.
Third, the reference standard
GB/T 191-2008 packaging storage and transportation icon
GB 2792-81 pressure sensitive adhesive tape 180 degree peel strength determination method GB2828-87 batch inspection count sampling procedure and sampling table GB 4850-84 pressure sensitive adhesive tape low speed unwinding strength test method GB 4851-88 pressure sensitive adhesive Belt holding method
GB 4852-84 Pressure-sensitive adhesive tape initial tack determination method Bevel ball method GB 6388-86 Transport packaging receipt and delivery mark GB 7125-86 Pressure-sensitive adhesive tape thickness measurement method GB 7753-87 Pressure-sensitive adhesive tape stretching Performance test method GB/T 10003-2008 Ordinary double-stretch polypropylene film QB/T2422-1998 BOPP pressure-sensitive adhesive tape for sealing.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc