Carton Tape Making Machine
It is mainly used for proucing kinds of medical tape which are coating zinc oxde hot melt pressure sensitive adheive on silicon paper/glassine paper/ginning membrance, then laminate with cartoon PE/spun-laced non-woven fabric/cotton. or coat adhesive on kinds of substrate directly.
Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine
How the tape machine works www.easttapemachine.com
The work of the tape machine is divided into two parts, namely the printing and coating parts. In order to produce a better product, the two parts have different work divisions.
Printing
Place the roll to be printed on the unwinding roll and start the machine. The corresponding mechanism is rotated by the transmission device, and the gravure printing is realized by lamination of the printing plate roller and the printing rubber roller, and then dried by natural drying or heating, and the winding roller is wound up to complete the printing function.
Coated www.easttapemachine.com
The substrate to be coated is placed on the unwinding roller, the machine is started, and the corresponding mechanism is driven by the transmission device.
The tape machine adopts electric, coal, gas and three-bake integrated, electronic temperature control, stepless speed change, automatic counting, automatic correction, gravure printing, advanced infrared heating, cooling and recompression and other high-tech. The production process of discharging, printing, coating, drying, hot air circulation, traction, slitting and winding is completed.
Carton Tape Making Machine
Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine
Tape machine parameters settings:
Production speed: The coating production speed has a direct relationship with the thickness of the coating, the length of the oven, and the drying temperature. Increasing the speed can increase the drying temperature in the oven; in the case of product quality assurance, the speed can be appropriately increased.
Tool setting: The blade pitch on the tool shaft can be adjusted according to the production process requirements, and the tool distance of the multi-knife pipe cutting machine can be adjusted so that the cut product and the blade spacing should correspond.