Machine Open Tape Factory

Machine Open Tape Factory

It is mainly used for proucing kinds of medical tape which are coating zinc oxde hot melt pressure sensitive adheive on silicon paper/glassine paper/ginning membrance, then laminate with cartoon PE/spun-laced non-woven fabric/cotton. or coat adhesive on kinds of substrate directly.

Machine Open Tape Factory

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Tape machine technical parameters
Machine type: oven-heated, shaped arch,
Substrate width: min500mm -- max1000mm.
Coating width: 500mm -- 1000mm
Substrate diameter: unloading up to 600mm.
Coating coating: water-based pressure sensitive adhesive
Substrate raw material: BOPP film
Gluing method: wire rod type gluing
Glue viscosity: 50-150cps.
Mechanical speed: 200 M/min.
Coating speed: up to 15~20M/min (according to customer requirements)
Reference temperature: Indoor: Calculated by Min.10degree C.
Oven temperature: up to 120 ° C.
Heating method: steam, heat transfer oil (according to customer choice)
Unwinding method: single station unwinding
Winding method: Double station exchange winding (4 axis winding)
Compressed air: 5Kg/Cm2.
Total power : 15KW, 380V, 50Hz

Machine Open Tape Factory

Tape factory budget cost --

1. Product introduction
BOPP adhesive tape is made of biaxially oriented polypropylene film as base material and coated with acrylic pressure sensitive adhesive. It has adhesiveness, initial adhesion, good adhesion, convenient use and low cost, and various colors. Mainly use the general carton seal, lightweight wrapping and so on.
Color: transparent, milky white, beige, golden, earthy yellow and other colors.
Sealing tape specification
The thickness is 0.05mm, and the broadband has 36, 45, 48, 55, 60, 72mm, etc., which can be produced according to user requirements.
Sealing tape storage and use environment:
● The product should be packaged and stored in a cool dry environment to avoid exposure to sunlight, freezing and high temperatures. ● Store the environment at 20 °C ~ 30 °C to avoid places where the temperature is too high. ● The surface to be bonded should be clean, dry, free from grease or other contamination. ● The shelf life is half a year.

Product Features 
· Instant Adhesion - The sealing tape is sticky.
· Fixing ability - even with a small amount of pressure, it can be glued to the workpiece according to your ideas.
· Easy to tear - easy to tear off the tape without the tape stretching and dragging.
· Controlled deployment - The sealing tape pulls the tape in a controlled manner that is neither too loose nor too tight.
· Flexibility - The sealing tape can be easily adapted to sharp curves.薄 Thin – the sealing tape strip will not leave thick edge deposits.平滑 Smoothness - The sealing tape feels smooth and does not irritate the hands when pressed.
· Anti-transfer - no adhesive will be left after the sealing tape is removed. ? Anti-solvent – ??The backing material of the sealing tape prevents solvent penetration. ? Anti-fragmentation – the sealing tape does not have lobes.
· Anti-retraction - the sealing tape can stretch along the curved surface without retraction.
· Anti-stripping - the paint will be tightly fastened to the backing of the sealing tape.


Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?