suitable for cutting PVC tape,masking paper tape,double sided tape,kraft tape,conductive foam tape,duck tape,protective film, etc.
Tape Making Machien
Protection management regulations：
The tape machine protection installation must meet the following requirements:
3. At least one set of anti-running switch shall be installed at the head, middle drive and tail of the belt machine; the delay of the belt machine's deviation switch shall not exceed 2S, and the deviation protection test shall be performed once a week, and the record shall be made; A deviation tester (installation height exceeding 1.8 m) at the elevated position of the belt conveyor must be equipped with a drawstring test device. The definition of the deviation of the belt machine: the upper surface of the upper belt is out of the upper roller for the deviation, and the lower belt is the deviation of the belt.
4. At least two sets of anti-ripping protection shall be installed at each receiving point of the tape machine. The tear-proof protection distance shall not exceed 5 meters. The longitudinal tearing of the rope shall be placed in the middle of the vertical tearing of the pirated sheet. Rope plus travel switch form and two logic "AND gate" flap cleaner plus travel switch form;
5. When the tape machine installation length exceeds 100 meters, at least one pull-type emergency stop switch should be set every 100 meters, and one intelligent amplified telephone should be set every 200 meters; all locked and amplified telephones should have a locking function, and Number management along the line and the amplified telephone.
BOPP tape technical specifications.
Third, the reference standard
GB/T 191-2008 packaging storage and transportation icon
GB 2792-81 pressure sensitive adhesive tape 180 degree peel strength determination method GB2828-87 batch inspection count sampling procedure and sampling table GB 4850-84 pressure sensitive adhesive tape low speed unwinding strength test method GB 4851-88 pressure sensitive adhesive Belt holding method
GB 4852-84 Pressure-sensitive adhesive tape initial tack determination method Bevel ball method GB 6388-86 Transport packaging receipt and delivery mark GB 7125-86 Pressure-sensitive adhesive tape thickness measurement method GB 7753-87 Pressure-sensitive adhesive tape stretching Performance test method GB/T 10003-2008 Ordinary double-stretch polypropylene film QB/T2422-1998 BOPP pressure-sensitive adhesive tape for sealing.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc