Tape Cutting Machine Automatic

Tape Cutting Machine Automatic

Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.

Tape Cutting Machine Automatic

GL--701 Hot Sale Automatic Tape Cutting Machine for PVC Electrical , Masking Paper , Foam Double Sided ,BOPP Tape
 

For cutting BOPP / PVC / PE /PET/ EVA / 3M/Mylar / masking /foam / cloth /double sticky /Kraft / aluminum duct tape etc.

Tape Cutting Machine Automatic

The tape cutting process of the Guolian tape slitter is like this:

A roll of fabric, film or paper is loaded onto the shaft and the machine will roll or cut the fabric roll (film roll or roll) into small rolls of specified width.
Industry use:

For packaging food:

Large rolls of plastic film, such as biaxially oriented polypropylene (BOPP), paper or adhesive tape, are produced in large diameter rolls for maximum efficiency.

The tape is then cut into small rolls suitable for use in the packaging machine using a tape slitter.

Suitable for clothing and household items:

Large rolls of fabric or fabric can be cut into tape of various widths for use as a conduit or decoration on the garment.

And the slit tape can also be used as a raw material for the edge of the belt of the mattress or the decoration of the mattress frame.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com