Adhesive Coater Machinery

Adhesive Coater Machinery

suitable for cutting PVC tape,masking paper tape,double sided tape,kraft tape,conductive foam tape,duck tape,protective film, etc.

Adhesive Coater Machinery

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

 

Tape machine classification www.easttapemachine.com
The belt conveyors on the market can be divided into two categories, small-sized tape dispensers for personal investment and automatic coating tape dispensers for enterprise investment.
The raw materials required for the production of tape include bopp film, pressure sensitive adhesive, and paper tube. According to the width of raw materials: Type 500 1300 According to the degree of automation:
Semi-automatic slitting machine (no tube puller, manual upper and lower rolls)
Automatic slitting machine (automatic winding and unwinding, two reels) High-speed slitting machine (four-axis winding and slitting machine) Special material cutting equipment:
Electrical tape, textured paper, etc. - cutting table, rewinding cutting machine
Slitting of film substrate - special slitting machine with magnetic powder brake, can be used for uncoated paper, film, etc.

Adhesive Coater Machinery

Tape factory budget cost --

Production process

crafting process 
Printing
Printing patterns and text on the sealing tape not only increases the value of the tape, but also gives the tape a certain advertising function. When printing, it is necessary to pay attention to selecting the appropriate ink. Improper ink will affect the coating effect of the pressure sensitive adhesive. Something will lead to the adhesion of the pressure sensitive adhesive at the pattern, and the rubber transfer phenomenon occurs during unwinding.
2. Coating and drying
Coating is the most important process for making sealing tape. The pressure sensitive adhesive is applied to the BOPP film and then dried by an oven.
3. Slitting and winding
Cut the parent roll into the size that the user needs, and then curl it. This process should pay attention to keep the sharpness of the slitting knife, otherwise the edge of the tape will be uneven, which will cause the tape to be easily torn when it is wound.

Plant area
According to the size of the tape machine, it is 9.6 meters long, 2.2 meters wide and 2.2 meters high. The required workshop area is 25 × 10 = 250 square meters. The office area needs 10×10=100 square meters, and the total plant area is 250+100=350 square meters.

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com