Acrylic Water-Base Glue Coating Machine
suitable for cutting PVC tape,masking paper tape,double sided tape,kraft tape,conductive foam tape,duck tape,protective film, etc.
Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine
Tape dispenser installation www.easttapemachine.com
1. The site for site selection and installation of the tape conveyor must be on a relatively flat hardened floor. Because the tape machine needs a good environment for operation, it cannot be said that the ground is pitted and the various parts of the operation are uncoordinated to produce the product. Not qualified! This is all that needs to be considered.
2, the machine is assembled, the tape machine is generally separated from each other. Before the installation is completed, after the site is selected, the front and rear intermediate frames are placed on the level ground to maintain a uniform horizontal line! To maintain stable operation.
3. After the installation is completed, pre-work processing is performed on each part of the machine, including chain, sprocket, bearing, reducer, lubricating oil or grease.
4. After the lubrication treatment, the main components are debugged to keep them rotating smoothly, and no blockage can occur.
5. After the installation of each part is completed, turn on the power to test the machine! No need to install materials during the test machine, and do a bare test! Observe the operation of each component! Found an abnormality, power-off treatment,
6. When the tape machine is not running, the power must be disconnected for safety.
Tape factory budget cost --
1. Equipment requirements
Multifunctional tape machine (two sets)
· Considering the factors such as output, output value and cost, purchase two sets of multi-functional tape coating machines (model: GL1000) of Zhengzhou Yisite Import and Export Trade Co., Ltd. (Zhengzhou Guolian Machinery Equipment Co., Ltd.), each of which is 65,000 yuan. A total of 130,000 yuan. Calculated according to the normal working hours of eight hours a day, each day's output value is about 10,000 square meters.
· The equipment is equipped with a production process such as discharging, printing, gluing, drying, hot air circulation, traction, slitting and winding.
· The device adopts heating method (sonic electric heating magnetic field), and has high-tech such as electronic temperature control, stepless speed change, automatic counting, automatic deviation correction, gravure printing, advanced infrared heating, and cooling recompression.
· Tape machine size: 9.6 meters long, 2.2 meters wide, 2.2 meters high.
a. BOPP film has high mechanical strength, good heat resistance and low temperature resistance, and good transparency. The current market price is 12.5 yuan / kg (from Suzhou Jinfeng Adhesive Tape Factory) b. Pressure-sensitive adhesive The main component is acrylic acid. The ratio of glue to film is 1.2 to 1 to 1.5 to 1. The market price is 7300 yuan per ton. (Sourced from Suzhou Jinfeng Adhesive Tape Factory)
c. Paper tube The price is 0.95 yuan per piece (length is one meter) (from Suzhou Jinfeng Adhesive Tape Factory)