Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.
National Union cutting machine application and features:
Suitable for slitting BOPP tape, aluminum foil tape, cellophane tape, etc.
1) Fully automatic four-axis exchange, fast work efficiency.
2) Variable speed adjustment of the inverter and the three-stage instrument counter to ensure the accuracy of the rewind length. It can automatically decelerate at high speeds.
3) The unwinding tension is controlled by a pneumatic brake, and the winding tension is controlled by two. With clutch and independent slide, the tension can be adjusted freely.
4) The arc drawing roller can eliminate the wrinkles of the tape and make the material flat for feeding.
5) Pneumatic braking stops the machine immediately to get the exact position and label.
The main features of the National Union cutting machine
◎ Centralized control of all buttons, easy to operate.
◎The unwinding wheel adopts an arch design to wipe off the wrinkles of the tape during the feeding process.
◎ Equipped with industrial blade (air knife), suitable for slitting of BOPP tape.
◎The winding of the remaining material can be oscillated, which reduces the time for the remaining material to change the apron and improves the efficiency.
◎The oil pressure feeding mechanism can feed quickly and reduce labor intensity. (optional)
◎Automatic labeling mechanism to improve economy. (optional)
◎The feeding mechanism is equipped with a partition cover to reduce the material discharge noise and achieve the ideal working condition. (optional)
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc