Bopp Coating Tape Machine
Make adhesive tapes from raw material to different sizes of small clear & color & printed tapes and jumbo roll on same machine by one step.
Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine
GL-X Multi-function Tape Machine Tape Machine Use www.easttapemachine.com
Can produce conventional dry tape, all kinds of wide, narrow tape, transparent tape, color tape, printing tape and so on. Tape machine
During the process of use, the machines associated with the machine include cutting machines, coating machines, pressureless boilers, pipe cutting machines, slitting machines, slitting machines, and cutting machines.
Bopp Coating Tape Machine
Tape factory budget cost --
Production process
crafting process
Printing
Printing patterns and text on the sealing tape not only increases the value of the tape, but also gives the tape a certain advertising function. When printing, it is necessary to pay attention to selecting the appropriate ink. Improper ink will affect the coating effect of the pressure sensitive adhesive. Something will lead to the adhesion of the pressure sensitive adhesive at the pattern, and the rubber transfer phenomenon occurs during unwinding.
2. Coating and drying
Coating is the most important process for making sealing tape. The pressure sensitive adhesive is applied to the BOPP film and then dried by an oven.
3. Slitting and winding
Cut the parent roll into the size that the user needs, and then curl it. This process should pay attention to keep the sharpness of the slitting knife, otherwise the edge of the tape will be uneven, which will cause the tape to be easily torn when it is wound.
Plant area
According to the size of the tape machine, it is 9.6 meters long, 2.2 meters wide and 2.2 meters high. The required workshop area is 25 × 10 = 250 square meters. The office area needs 10×10=100 square meters, and the total plant area is 250+100=350 square meters.