Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.
Tape Cutting Machine Usage:
The machine is suitable for cutting BOPP tapes, PVC tapes, PE tapes, masking paper tapes, double sided tapes, kraft paper tapes, foam tapes, duct tapes, industrial tapes, protective film, etc.
tape cutting machine Main Features:
1) Easy to operate.
2) Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.
3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, lineary or bit to make sure the cutting process accurate and perfect.
4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.
5) Round knife cutting promotes the working efficiency.
Guolian tape cutting and slitting and rewinding machine is an upgraded model of BOPP OPP tape large-volume slitting and rewinding. It is suitable for small rolls for paper use and carton packaging purposes.
The machine is a complete production line including the main slitter rewinder, core loader, core cutter and mini doctor rewinder.
It is designed with a 4-axis automatic change. When the winding reaches the set length, it will switch from the other two axes to the next.
The machine adopts the latest Japanese tape cutting technology and is warmly welcomed by countries such as Europe, Middle East and America.
Different models can be used.