Tape Roll Cutting Machine

Tape Roll Cutting Machine

Tape Cutting Machine-

Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.

Tape Roll Cutting Machine

Tape cutting machine:
 

Widely used to cut kinds of woven belt, nylon buckles, lining, fabric tape without heat seal,plastic zipper, 
metal zipper, plastic lace,PVC tube  leather, aluminum platinum, PS material and so on.
We supply kinds of special blade,then you can get different shapes of cutting edge.

Tape Roll Cutting Machine

Guolian tape slitting machine configuration instructions:
The central panel is easy to operate. Suitable for BOPP tape and all single-sided tape slitting.

1. This machine adopts Mitsubishi PLC control, LED touch screen displays input data.

2. AC motor drive, variable frequency speed control running speed, can effectively protect electrical components.

3. Magnetic braking, smooth braking.

4. The single-roll tape uses a silicone roller; the winding is free of air bubbles. Specializing in the production of ultra clear transparent tape.

5. Single-roll tape uses a precision pressure regulator to control pressure stability.

6. Automatic rewinding side material

8. Stop the machine automatically when the side material breaks

9. Plus hydraulic automatic feeding device

10. Do not stop automatic labeling

11. The two motors work together and the shaft is replaced efficiently without stopping the machine.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com