Automatic Scotch Tape Machine

Automatic Scotch Tape Machine

Top selling transparent cello tape slitting machine 

Suitable for the slitting of BOPP, OPP, PE, PET, Aluminium and etc.

Automatic Scotch Tape Machine

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Tape dispenser installation www.easttapemachine.com
1. The site for site selection and installation of the tape conveyor must be on a relatively flat hardened floor. Because the tape machine needs a good environment for operation, it cannot be said that the ground is pitted and the various parts of the operation are uncoordinated to produce the product. Not qualified! This is all that needs to be considered.
2, the machine is assembled, the tape machine is generally separated from each other. Before the installation is completed, after the site is selected, the front and rear intermediate frames are placed on the level ground to maintain a uniform horizontal line! To maintain stable operation.
3. After the installation is completed, pre-work processing is performed on each part of the machine, including chain, sprocket, bearing, reducer, lubricating oil or grease.
4. After the lubrication treatment, the main components are debugged to keep them rotating smoothly, and no blockage can occur.
5. After the installation of each part is completed, turn on the power to test the machine! No need to install materials during the test machine, and do a bare test! Observe the operation of each component! Found an abnormality, power-off treatment,
6. When the tape machine is not running, the power must be disconnected for safety.

Automatic Scotch Tape Machine

Introduction of four-axis winding new tape machine -- GL- X multi-function tape machine

Auxiliary accessories for the tape machine:
   Pipe cutting machine, power distribution cabinet. According to the production needs, Zhongsu can choose the auxiliary auxiliary body: multi-color printing machine, slitting machine, rewinding machine, beater, pipe drawing machine, etc. In order to produce better products, it is recommended to have a pipe cutter. Automatic pipe cutting machine
Tape machine installation and adjustment:
   1. Install the front frame, the middle frame and the rear frame on the reserved plane at the predetermined position, and horizontally align with the foundation firmly, so that the center line of the frame is in a straight line in the longitudinal direction; The rack is offset and swaying occurs to avoid accidents.
   2. Install the configured ovens in sequence on each rack and secure them with bolts; keep the oven and rack level and stable.
   3. Install the power distribution cabinet next to the front rack or at a convenient place. Connect the circuits according to the instructions. Finally, connect the power supply (make sure to disconnect the power when wiring).
   4. Install each internal configuration piece according to the set position, and adjust the level of each median, unwinding, winding, etc., and the axes are parallel to each other, perpendicular to the direction of tape movement. During the installation process, the smooth surface of each media cannot be scratched, and the correct installation of each component is maintained.
   5. Install the gears, pulleys and sprocket according to the test, and try to rotate properly to ensure the flexibility of rotation without abnormality and blockage; and add the corresponding lubricating oil to the chain and reducer.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com