Pvc Electrical Tape Cutting Machine

Pvc Electrical Tape Cutting Machine

Tape Cutting Machine-

Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.

Pvc Electrical Tape Cutting Machine

tape cutting machine-

This electric insulating pvc tape automatic log cutting machine is mainly used to cut the adhesive plastic tape without unwinding the tape roll. It is workable to cut ahesive BOPP tape, PVC tape, PE tape, masking tape, double sides adhesive tape, foamed adhesive tape, teflon tape, cloth tape, surgical adhesive tape, industrial electrical tape and etc.

Pvc Electrical Tape Cutting Machine

The tape cutting process of the Guolian tape slitter is like this:

A roll of fabric, film or paper is loaded onto the shaft and the machine will roll or cut the fabric roll (film roll or roll) into small rolls of specified width.
Industry use:

For packaging food:

Large rolls of plastic film, such as biaxially oriented polypropylene (BOPP), paper or adhesive tape, are produced in large diameter rolls for maximum efficiency.

The tape is then cut into small rolls suitable for use in the packaging machine using a tape slitter.

Suitable for clothing and household items:

Large rolls of fabric or fabric can be cut into tape of various widths for use as a conduit or decoration on the garment.

And the slit tape can also be used as a raw material for the edge of the belt of the mattress or the decoration of the mattress frame.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com