Acrylic Glue Coating Machine
1.Binary counter length setting, Winding length accurately, And stop automatically.
2. Rewinding shaft using the tile type air shaft design, Paper tube fixed firmly, smooth, not out of shape
3.Two shafts work alternately,reel alternation automaticly, saving time, highefficiency.
4.With pneumatic rubber roller pressure,Magnetic powder brake control tension to ensure the product quality
Coating Machine - End check item:
1. Scratches should be promptly responded to the head personnel.
2. Check parameters such as thickness, coating length, coating width, gap and tracking every 10 minutes.
3. When the belt is wrinkled, it should be promptly reacted or solved by itself.
4. Check if the correction is in the automatic state.
5. Whether there are particles on the guide roller.
6, the occurrence of cracks, bubbles, spots, leaking foil, water lines and other phenomena like timely response.
7. Check the dry humidity of the pole piece.
8. The density should be measured in time after changing the volume.
9. Check if the tension is restored.
10. After the operation is completed, it is necessary to clean up the site in time.
BOPP film tape introduction --
Second, the scope of use: (electronics, decoration, automotive, industrial packaging, clothing, circuit boards, electrical insulation, general industrial shielding) Some of the tapes are as follows:
1, masking tape
Features: Excellent viscosity, good temperature resistance, good tensile strength, good retention, no residue, can be baked multiple times in high temperature environment
Use: Widely used in electronic components such as: ceramic capacitors, polyester capacitors, metal capacitors, thermistors, etc. in the manufacturing process of the braid.
2, cold pressure tape
Features: Minimal initial adhesion, excellent adhesion to tape adhesive, good paper quality, no curling, good masking effect, and no damage to the core surface film.
Use: For metallized capacitor gold shield.
3, hot melt tape
Characteristics: It has small initial tack and instantly exhibits excellent adhesion under heating. It is used in combination with paper tape carrier, good fixing force, strong endurance, good weather resistance and good solvent resistance. Use: Widely used in the finished product of electronic components.
4, tear tape
Features: The tearing tape has low initial adhesion. When used, the two rubber faces are firm and sticky, the tape is easy to pull off, the tensile strength is very good, there is no breakage, and the tear tape of up to 6000M greatly improves your productivity. Use: For the forward braiding of the resistor.
5, tape tape
Features: Good adhesiveness, good tensile strength, good retention, even winding and long length, which can save the loading frequency and improve production efficiency.
Use: Tape used with paper tape for secondary tapes of resistors and automatic inserts.
6, braided tape
Features: The paper tape has strong tensile strength, good stiffness and even winding, and is used together with the tape. And there are many colors to choose from.
Use: Tape for use with tape, for secondary tapes for resistors and automatic inserts. SY674 and hot melt tape are used together for the finished product of electronic components.
7, double-sided tape
Features: Excellent adhesion and anti-aging.
Use: Used for surface bonding of various substrates, die, computer embroidery, nameplate and so on. Also: Micron tape, special temperature resistant tape, wafer packaging tape, masking tape, layered water-free kraft paper tape, wet water kraft paper tape, water-free kraft paper tape, cloth tape, PE tape, polyester tape, PVC tape, aluminum Thin tape, zebra tape, fiber tape, etc.