Hot & Cold Knife Fabric Tape Cutting Machine

Hot & Cold Knife Fabric Tape Cutting Machine

Tape Cutting Machine-

Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.

Hot & Cold Knife Fabric Tape Cutting Machine

 Guolian tape slitting machine - Application areas:

Manual cutting machine for PVC / masking tape / foam tape / double-sided tape / kraft paper tape / cloth tape / film large volume ... etc.

Hot & Cold Knife Fabric Tape Cutting Machine

National Union cutting machine application and features:

Suitable for slitting BOPP tape, aluminum foil tape, cellophane tape, etc.

feature:

1) Fully automatic four-axis exchange, fast work efficiency.

2) Variable speed adjustment of the inverter and the three-stage instrument counter to ensure the accuracy of the rewind length. It can automatically decelerate at high speeds.

3) The unwinding tension is controlled by a pneumatic brake, and the winding tension is controlled by two. With clutch and independent slide, the tension can be adjusted freely.

4) The arc drawing roller can eliminate the wrinkles of the tape and make the material flat for feeding.

5) Pneumatic braking stops the machine immediately to get the exact position and label.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com