Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
Tape Cutting Machine Usage:
The machine is suitable for cutting BOPP tapes, PVC tapes, PE tapes, masking paper tapes, double sided tapes, kraft paper tapes, foam tapes, duct tapes, industrial tapes, protective film, etc.
tape cutting machine Main Features:
1) Easy to operate.
2) Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.
3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, lineary or bit to make sure the cutting process accurate and perfect.
4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.
5) Round knife cutting promotes the working efficiency.
tape cutting machine-
This electric insulating pvc tape automatic log cutting machine is mainly used to cut the adhesive plastic tape without unwinding the tape roll. It is workable to cut ahesive BOPP tape, PVC tape, PE tape, masking tape, double sides adhesive tape, foamed adhesive tape, teflon tape, cloth tape, surgical adhesive tape, industrial electrical tape and etc.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc