Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
National Union cutting machine application and features:
Suitable for slitting BOPP tape, aluminum foil tape, cellophane tape, etc.
1) Fully automatic four-axis exchange, fast work efficiency.
2) Variable speed adjustment of the inverter and the three-stage instrument counter to ensure the accuracy of the rewind length. It can automatically decelerate at high speeds.
3) The unwinding tension is controlled by a pneumatic brake, and the winding tension is controlled by two. With clutch and independent slide, the tension can be adjusted freely.
4) The arc drawing roller can eliminate the wrinkles of the tape and make the material flat for feeding.
5) Pneumatic braking stops the machine immediately to get the exact position and label.
What are the specifications of Guolian cutting machine?
The automatic hydraulic cutting machine works by pressing down the mold and cutting the material through the mold/mold.
Suitable for die cutting all non-metallic soft/semi-soft materials. From manual to fully automatic, suitable for leather, fabric, EVA / EPE foam, blister packaging, rubber, sponge, car / aircraft.
Fully meet the requirements of providing professional cutting solutions / feeding systems.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc