Automatic Bopp Tape Slitting Machine

Automatic Bopp Tape Slitting Machine

Slitting adjustment
1. Put the cutter down, open the curling blower switch, set the winding tension, start the machine, run 2-3 meters, stop;
2. Measure the width of each joint to confirm whether the requirements are met. If there is any error, the ratio of the cutter should be re-matched.
3. Check whether each of the paper cores and the corresponding film are aligned, otherwise adjust them;

Automatic Bopp Tape Slitting Machine

Tape slitting machine parking
1. When the film roll is run to the set length, the device automatically stops.
2. During the operation of the device, you can press MACHINE STOP to stop as needed.

3. When fast stop is required, press the MACHINE STOP button to be greater than 2S.
4. When there is an emergency such as equipment or human accident, press EMERGENCY STOP to stop the emergency.

Automatic Bopp Tape Slitting Machine

Main way of tension control
The tension control method is generally divided into two types: open loop control mode and closed loop control mode. The open loop control is to directly drive the winding mechanism with an electric motor having a similar winding characteristic n = kD (n is the rotational speed, k is a constant, and D is the diameter of the winding roller) to obtain an approximate constant tension operation. The open loop control has poor randomness and low control precision. The closed loop tension control has two kinds of direct tension control and indirect tension control. In the actual production process, the volume is adjusted, that is, the tension is fed back, compared with the given tension, and then the difference is applied to the regulator to adjust the controlled object so that the output tension meets the actual demand. It is called direct tension closed-loop control. This method can eliminate the steady-state error without considering various compensations. The indirect tension control uses the motor speed-torque characteristic curve to control the torque to control the torque, so as to achieve the purpose of controlling the tension. This method requires dynamic and static compensation. Sometimes, in order to obtain more precise control performance, a composite tension control method is adopted, that is, the required control amount is first determined according to an indirect control algorithm, and various compensations are considered to make the indirect control as accurate as possible, and then the direct tension control is used for fine adjustment.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com